430-22011 Tilt & Trim Motor Replacement for Mercury Marine 135-225HP All Models, 828708, 828708T, 878265A1, 878265A4, 8M0031551, T1082M, 67-2802, 4-1254, P220N, 6250, 10826N

430-22011 Tilt & Trim Motor Replacement for Mercury Marine 135-225HP All Models Compatibility: Replacement for Mercury Marine Tilt & Trim Motor All Models 135HP 150HP 175HP 200HP 225HP 250HP. Also suitable for 2003 Mercury Optimax 200, Mercury Optimax 220 / 225 from 2000 to present. Mercury Mariner 0/B, Earlier Models Used 107-119m. Replace Part Number: 430-22011 Technique Information: Voltage:12 Volts Direct Current. Rotation: Reversible. Field Hsg OD: 75mm / 2.953in. Overall Length:124.7mm / 4.909in. Shaft OD: 8mm / 0.315in Approximate Weight:3.24 lbs / 1.47 kg. Installation Instructions Disassembly: 1. Remove the negative battery cable from the battery. 2. Locate the tilt trim motor on the outboard motor. Typically located on the port side of the engine and is attached to the hydraulic tilt and trim assembly. 3. Disconnect the wiring harness from the tilt trim motor. 4. Remove the two bolts that hold the tilt trim motor to the hydraulic tilt and trim assembly. 5. Carefully remove the tilt trim motor from the hydraulic tilt and trim assembly. 6. Inspect the tilt trim motor for any damage or wear, such as a cracked housing or a broken shaft. If the motor is damaged, it will need to be replaced. Installation: 1. Place the new tilt trim motor onto the hydraulic tilt and trim assembly. 2. Align the bolt holes on the tilt trim motor with the holes on the hydraulic tilt and trim assembly. 3. Insert the two bolts that hold the tilt trim motor to the hydraulic tilt and trim assembly. 4. Tighten the bolts securely. 5. Reconnect the wiring harness to the tilt trim motor. 6. Install the negative battery cable to the battery. 7. Test the tilt trim motor to make sure it is working properly.

• 【Perfect Fit】 430-22011 Tilt & Trim Motor Replacement for Mercury Marine Tilt & Trim Motor All Models 135 HP 150 HP 175 HP 200 HP 225 HP 250 HP. Also suitable for 2003 Mercury Optimax 200, Mercury Optimax 220 / 225 from 2000 to present. Mercury Mariner 0/B, Earlier Models Used 107-119m. Replace Part Number: 430-22011
• 【Replace Part Number】 Mercury Marine 828708, 828708T, 878265A1, 878265A4, 8M0031551, MPA Small Motor P220N, NAPA Small Motor RN10826, Wilson 94-35-1019, Wilson Small Engine 74-35-10826, WAI 10826N, 82-7867, Sierra Marine 18-6773, Remy RT05005, RCP 26250A, MP Parts 4-1254, Mallory 9-18204, EMS 49-6250, EMP Parts 4-6773, Dixie TM-513, Barsanco 540-10826, API Marine PT486NM, Arco Marine 6250, Arrowhead Trm0009, 430-22011, Lester 10826, Mes Motorcycle Marine T1082M, Minnpar 67-2802, PIC 107-126
• 【Technique Information】 Meets fitment data for Mercury power tilt and trim units.Voltage:12 Volts Direct Current. Rotation: Reversible. Field Hsg OD: 75mm / 2.953in. Overall Length:124.7mm / 4.909in. Shaft OD: 8mm / 0.315inShaft Notes: Tanged Shaft. Approximate Weight:3.24 lbs / 1.47 kg. Notes: (2) 6.5mm ID Mounting Holes, (2) 3-1/2 Foot Long Wire Harness With Bullet Connectors, 1/4" Mounting Holes see less. Package included Qty-1Outboard Tilt Trim Motor, Qty-1 Sealing Ring, Qty-2 Cable Ties.
• 【Tilt & Trim Motor】 Tilt trim motor effortlessly raises and lowers boat engines to the perfect angle for better on-the-water performance and fuel economy. Lift your engine upward to avoid damage when loading your boat on a trailer. Blue wire carries power to raise engine, and green wire for lowering engine. All Sixcow products support 30-Day money-back guarantee, 12-Month warranty for quality-related issues. Simply return it for your warranty.
• 【Superior Material & Easy Installation】 Constructed of marine-grade metal housing with durable electric component. Excellent corrosion and rust resistance. High quality brushes, bushings and armatures for longer service life. Installation manual included. Simply remove negative battery cable, remove wiring, 2 bolts and motor. Replace with new motor, do everything in reverse and you’re ready to go!